Mini cnc lathe

Xendoll mini CNC lathe is up to date CNC lathe that can be operated by hand or computer.This CNC lathe can be used to train people operate the CNC lathe. The CNC system is made up of the lathe and the software that base on Windows operating system. This mini CNC lathe can control three axes at the same time and automatically run. This system have linear interpolation, circular interpolation, MDI running, jog step, simulative run and dynamically showing the G code function. The language that the system uses is industry standard g- code, s-code and m-codes.This system is very useful, because you can do the programme, sculpting for thework piece and training the operation of CNC at the same computer(if you install the relational soft at the same computer such as MasterCAM,UG,CAXA ). So the Xendoll mini CNC lathe is a ideal equipment for the scientific research organization, university,DIY fan and CNC hobbyist. The appearance of the Xendoll mini CNC lathe will have great significance in training the operation of the CNC lathe and reducing the training charge. The machine can process various plates , plastic,wood and Modeling wax. The xendoll CNC software The new Xendoll CNC lathe system is now ready for shipment, the Xendoll CNC system base on PC, when you have a computer(we recommend at least an 1GHz Pentium class computer or faster for use with the frequency mode and Windows XP or Windows 2000),you can install Xendoll CNC system and the software adopt windows application screen so it is very easy to operate. The language it use is called g-code, m-code and s-code. It communicates principally via on parallel port (with 25 pin). The function of the soft is very strong, it can transform the file of the DXF, BMP into the g-code and execute the NC code that is made by CAM/CAD (such as MasterCAM, UG, CAXA). For making sure the process safely, we install the limit switch for X, Y, Z axes and have a emergency button in the software. The lathe CNC software have four control screen 1) Program run-The function of this screen is exact showing the toolpath, controlling the spindle speed and cool on/off. 2) MDI screen-in this screen you can make the lathe run to the position that you appoint fast 3) Set screen-set the radius compensation ,tool length offset and simulate Program run 4) Diagnostics-diagnosticate the set of the soft is right or wrong Description of the Xendoll Driver Box When Xendoll developed the CNC system for the mill and lathe, we installed the driver, power supply and parallel in a box, the box contain four driver that control the stepper motor, the speed of the spindle, spindle CW/CCW, the limit switch ,the flood cool and mist cool. Each control has its own cable that connect up a plug, the driver box has its own power on/off switch and a bright red LED that indicates when power is on, it operate on 100~240VAC, 50~60HZ power, current is 3A.the parallel have 25 pin. The drive of the stepper motor are designed to operate stepper motor eight mode. This technique greatly enhance the mill's precision and make the mill have low noise and low oscillation. Characteristic of the xendoll CNC lathe 1) The CNC software adopt friendly windows application screen so it is very easy to operate. You can use the same computer as the CNC system and programme system if you have install the CAD or CAM( as MasterUG CAXA, using the soft make the NC file) 2) High exact stepper drive(eight mode) and high exact leadscrew 3) Smart outlook and operate easy 4) High exact spindle motor and easy to control the spindle speed with variable speed adjusting